Home / body / body building / drag

Fox Body Drag Car Builds

21 Jan, 2021 Post a Comment

This foxbody build needed something more, and so we decided to recreate a cobra foxbody. In fact, even just a factory 5.0l has the grunt behind it to twist and disort the frame.

Foxbody Mustang Modern Classic Hagerty Articles

A centrifugal blower (paxton, vortech, powedyne) builds boost with rpm, so on the bottom end (at 3000 rpm or so) there will be very little boost (2 psi maybe), where as the turbo maybe able to generate the full 10 psi by this point.

Fox body drag car builds. Steel roof and rear quarters, 25.4 certified chassis (4.50/7.50). Plus stock fox body suspension sits way to high. So much for the endless parts availability for fox bodies.

To gain full access you must register. 25.5 fox body ultra street here are a few pics of a fox body that we installed one of our cad designed c/m 25.5 cages in, installed our mini tubs, and lightweight pro battery cut off switch assembly. Relatively simple car that works well and runs much.

Proven mid 4 sec/155+ car. I know, it’s a really weird name to give to a car. Turbos work so well because they can make full boost as low as 2500 rpm, giving the car true big block torque.

We also installed out lower adjustable torque boxes, reinforced the upper mount and built a bullet proof 8.8 rear with all strange internals. Not bad for a 2,900 lb street car! At least in terms of an off the showroom setup.

As you may already know, however, the svt cobra fox was never offered as a convertible. The foxbody frame is known to be very weak in part to it's unibody design and insufficient bracing. The first of its kind from svt, the cobra foxbody was a set the precedent for performance.

It also doesn’t matter what engine it has either, or transmission. Most fox body owners swap the front suspension to coilover and put lowering springs in the rear. Unfortunately, the fox body chassis doesn’t handle very well in stock form.

First of all, before even touching the engine, it is recommended install subframe connectors. We never had it on a dyno, but we would guess it made around 300whp. It doesn’t matter if it’s a coupe, convertible, or a hatch.

During an unrelated phone conversation he casually mentioned that he had ecology auto wrecking coming at the end of the week to take the car away. Matt’s goal with the build was to create a fox body that could go around corners, as opposed to the more typical drag car route. Registration is free and it takes only a few moments to complete.

A sergeant at huntsville pd, aiton bought his mustang through a local craigslist ad in 2011. Please give us an overview of your autocross fox body mustang. A simple premise, and with a car that weighed around 1,360kgs (3000lbs) from factory, it wasn’t an unrealistic goal either.

A fox body mustang is a mustang produced anywhere from 1979 to 1993. If all goes well this combo should be good for 1500+ horsepower with ease. As long as it’s between the ages of 1979 and 1993, it’s a fox body.

It earned its “fox body” nickname because it was built on the fox platform. Putting the car up on an alignment rack, we realize both my rear wheel bearings need replacing. See more ideas about ford mustang, mustang, fox body mustang.

He had done a head and intake swap a few years back and couldn’t get it to run. Why is it called a fox body? These cars have a slightly longer wheelbase than a mustang (by 5 inches) but they have less insulation, less metal, and an empty space, so the listed weight is slightly less than the.

A good friend of mine owned the car previously.

Sweet !!! Drag racing cars, Mustang coupe, Fox body mustang